Molds, dies and presses on a real PM schedule. Your techs just talk.
Fortul is maintenance software for plastics, packaging and printing plants. A tech snaps a photo or says what they did at the press. Fortul drafts the work order, logs the parts and updates the mold or die history. A person approves it.
Email us Launching January 2027
What goes wrong in a plastics or packaging maintenance shop
1. Molds and dies are assets, and they wear by cycles, not by weeks
A mold that ran 400,000 shots is not the same as one that sat on the rack. A calendar PM sends the tool to the shop too early or too late. The shot count lives on the press controller, on a whiteboard or in a tool-room notebook.
How Fortul helps
- Every mold, die, screw, barrel, anvil, plate cylinder and chill roll can be an asset with its own history and photos.
- Meter-based PMs are on Premium. Set a PM to trigger at a shot count, cycle count, run hours or linear feet. Enter the reading from the press, by voice or photo, when the tool is pulled or at shift change, and Fortul shows what is due.
- Track the same mold across presses. Its history follows the tool, not the machine it last ran on.
- Starter PM triggers for a mold (tune to your toolmaker’s guidance): cavity and vent cleaning, ejector and slide lubrication, water-line and fitting check, gate and parting-line inspection, polish check.
Fortul records the readings your people enter. We do not claim automatic cycle counting from presses.
2. Changeovers eat the schedule
Every changeover is a chance for a missed step: a clamp not torqued, a hose not checked, a mold put away dirty.
How Fortul helps
- Build a changeover checklist per press or die type once, with photos. Checklists are unlimited on every plan.
- Pull-and-return inspection: when a mold comes off, the tech notes damage by photo or voice. Fortul drafts a work order for the tool room. The next run does not start on a damaged tool.
- Time logs show how long changeovers and repairs actually take.
3. Press downtime, and knowing why
One press down can stop an order, a pack-out line and a shipment.
How Fortul helps
- Anyone on the floor scans the QR sticker on the press, takes a photo or records a voice note, and submits in about 30 seconds. No app, no login, no email. Requesters are free and unlimited.
- Fortul answers “what did we replace on press 6 last time the hydraulics overheated?” from your own history.
- After launch, Premium adds AI root-cause analysis to help a person look across repeated failures.
- Estimate what an hour costs you with the free downtime cost calculator.
4. Spare parts: the right ones, not too many
Heater bands, thermocouples, check rings, seals, hoses, blades, anilox and doctor-blade supplies, and lamps. Stock-outs stop presses. Overstock ties up cash and hides in a cage.
How Fortul helps
- Parts stock with low-stock alerts on every plan. Techs log parts used in the same voice note as the repair.
- Premium: purchase requests, POs and vendors, plus inventory optimization with intermittent-demand forecasting and reorder points. The engine calculates the numbers. Fortul explains them. A person approves orders.
- Photo a part and ask Fortul where it is used.
5. Lockout/tagout and guarding records
Presses, extruders and converting equipment have stored energy: hydraulics, pneumatics, springs, heat, gravity. OSHA’s lockout/tagout standard (29 CFR 1910.147) asks employers to keep energy-control procedures and to inspect them periodically, at least annually. Plastics machinery also has consensus safety standards (for example ANSI/PLASTICS B151.1 for injection molding machines), which are not OSHA rules but are widely used as a reference.
How Fortul helps
- Attach the lockout procedure to the asset. Techs open it from the work order.
- Schedule the annual periodic inspection as a recurring PM with a checklist and sign-off. See our free LOTO annual inspection template.
- A complete, time-stamped record of who did what, per machine.
If you supply food-contact packaging, your customers or certification bodies may also ask for maintenance records. Check the standard that applies to you.
6. Multilingual crews
Press operators, setters and maintenance techs often speak several first languages on one floor.
How Fortul helps
- The field app and QR portal run in 10 languages. Voice reports work in some languages; the rest are in beta. Messages and notes are auto-translated.
- Speak Spanish at the press; the manager reads English.
- Picture-first reporting for crews without a supported language.
- Works offline. Full offline on every plan, tested with 10,000 random offline, kill and reconnect cycles with zero lost or duplicated records.
Starter PM list for a plastics or packaging plant
Tune every row to the OEM manual and your toolmaker.
| Equipment | Example PMs | Trigger |
|---|---|---|
| Injection molding press | Hydraulic oil level/filter, platen and tie-bar check, nozzle and heater-band check, safety gate interlock test | Weekly, monthly, run hours |
| Mold | Clean vents and cavities, ejector/slide lube, water-line check, inspection on pull | Shots, per run |
| Extruder | Screw/barrel wear check, gearbox oil, heater and thermocouple check, die cleaning | Run hours, monthly |
| Film line | Die-lip, nip roll and chill roll inspection, corona treater check | Weekly, run hours |
| Corrugator and converting | Knife and slitter inspection, glue-system check, steam and boiler items | Daily, weekly |
| Printing press | Anilox and plate-cylinder inspection, doctor blades, dryer and lamp check, ink-pump service | Per run, weekly |
| Chillers and cooling towers | Water-quality, coil and pump check | Monthly, quarterly |
| Granulators and conveying | Blade check, bearing lube, filter cleaning | Weekly |
| Compressed air | Filters, dryer drain, leak walk | Weekly, quarterly |
| Auxiliaries | Dryers/hoppers, loaders, mold-temperature units | Monthly |
Pricing
| Basic | Premium | |
|---|---|---|
| Per user/month, billed annually | $19 | $39 |
| Per user/month, billed monthly | $23 | $45 |
| Work orders, calendar PMs, checklists, parts stock, downtime recording, Fortul in chat, offline | Yes | Yes |
| Meter-based PMs (shots, cycles, hours), downtime analytics, labor cost, POs, inventory and scheduling optimization, API/MCP, Zapier (coming soon), Slack, BI export, sensor webhooks, multi-site | — | Yes |
Prices plus applicable sales tax. 30-day free trial on Premium, no card. Self-serve refund any time. No seat minimums and no platform fee. AI is not metered and there are no credits. Volume discounts at 11+ paid seats. See /pricing.
Security
AWS US East (Ohio). Encryption in transit and at rest. Org-level isolation by Postgres row-level security. Audit log of every change. Export any time. Fortul does not currently hold a third-party security certification or audit report.
FAQ
Can Fortul trigger a mold PM from shot count? Yes, on Premium. You or your tech enter the shot count (by voice, photo or keyboard) and Fortul shows what is due. Automatic readings from the press are not part of the core product; on Premium, a sensor system can send alarm webhooks that create draft work orders.
Does a mold keep its history when it moves between presses? Yes, if you set the mold up as its own asset. The history follows the tool.
Can I log a changeover by voice? Yes. Say what you did; Fortul drafts the work order or fills the checklist items. A person approves.
Can operators report problems without an app? Yes. A QR sticker on the press opens a report form in the browser: photo or voice, about 30 seconds, no app, no login, no email. Requesters are free.
Do you cover extrusion, film, corrugated and printing, not just molding? Yes. Any asset can be tracked by calendar on every plan, and on Premium by run hours or any meter you define (shots, cycles, feet, impressions).
How do you handle food-contact packaging? Fortul keeps time-stamped maintenance records with photos and an audit log. Which standard you need and what your auditor requires is up to you; Fortul does not certify compliance.
What if some of the crew do not speak English or Spanish? The field app and QR portal run in 10 languages. Voice reports work in some languages; the rest are in beta. Picture-first reporting covers the rest.
Can Fortul change records without a person? No. Fortul drafts; a person approves anything that matters. Every change is in the audit log.
How do I switch from Excel or another CMMS? Upload the file. Fortul maps assets, history and PM schedules, shows a dry-run report, then imports. You can undo it. Free.
Next steps
Email us Launching January 2027
- Free: Downtime cost calculator
- Free: LOTO annual inspection template
Sources
- https://www.osha.gov/plastic-industry/standards (accessed 2026-11-05) — OSHA plastics standards page; consensus standards such as ANSI/PLASTICS B151.1 are not OSHA regulations; 1910.147 is the enforceable lockout rule.
- https://www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/part-1910/subpart-J/section-1910.147 (accessed 2026-11-05) — lockout/tagout; periodic inspection at least annually.