Keep the cold chain running. Keep the records complete. Even in the freezer.

Fortul is maintenance software for cold storage, refrigerated warehouses and food 3PLs. Your techs snap a photo or say what they did. Fortul drafts the work order. A person approves it. It works with no signal, so the minus-10 freezer is not a dead zone.

Email us Launching January 2027


What goes wrong in a cold-storage maintenance shop

1. Refrigeration is the product

When a compressor, evaporator fan or defrost cycle fails, the damage is not “a line is down”. It is product at risk. You need to know three things fast: what failed, what was done last time, and who is on the way.

How Fortul helps

  • Every compressor, condenser, evaporator, VFD and controller is an asset with its own history. Photos, parts used and notes stay on the asset.
  • Ask Fortul “what did we do the last time evaporator 4 iced up?” and get the history in seconds.
  • Recurring calendar PMs are on every plan; meter-based PMs (run hours) are on Premium.

2. Temperature excursions need a fast, recorded response

Your monitoring system already raises the alarm. The gap is what happens next: someone has to open a work order, find the asset and write down what was found.

How Fortul helps (Premium)

  • Sensor alarm webhooks. Your monitoring system, BMS or sensor vendor sends an alarm to a Fortul webhook. Fortul creates a draft work order against the right asset, with the alarm details attached.
  • A person reviews and approves the draft. Nothing is dispatched without a human.
  • The tech’s findings, photos and time are added to the same record, so the excursion log and the repair log line up.

Fortul does not replace your temperature monitoring. It takes the alarm your system already sends and turns it into a work order with a record. We do not claim to predict failures from sensor data.

3. Refrigerant records

Many refrigeration systems are subject to leak-repair and recordkeeping rules. The exact rules depend on the refrigerant, the system size and the type of system. For example, EPA’s leak-repair rules for HFC-containing appliances (40 CFR 84.106) apply from 1 January 2026 to appliances with a full charge of 15 lb or more, and they ask owners to keep records of refrigerant additions, leak inspections, repairs and verification tests, generally for at least three years. The older rules for ozone-depleting refrigerants (40 CFR Part 82, Subpart F) apply at 50 lb or more.

How Fortul helps

  • Build a leak-inspection checklist once. Reuse it as a recurring PM on each system.
  • Log every refrigerant addition as a work order with the amount, the technician and the date, so the numbers you need for a leak-rate calculation are in one place.
  • Every change by a person or Fortul is in the audit log. Export any time.

Fortul gives you complete records. It does not decide whether a system is compliant. Your refrigeration contractor, your EHS lead and the current rule text do that. See the note at the bottom of this page.

4. Ammonia systems and mechanical-integrity records

If your site holds 10,000 lb or more of anhydrous ammonia in a process, OSHA’s Process Safety Management standard (29 CFR 1910.119) and EPA’s Risk Management Program (40 CFR Part 68) are likely to apply. Under PSM, the mechanical-integrity element asks you to inspect and test covered equipment on a schedule based on manufacturer recommendations and good engineering practice. Each inspection or test record should show the date, who did it, the equipment ID, what was done and the result. Industry practice for ammonia systems often follows IIAR standards such as IIAR 6 (inspection, testing and maintenance).

How Fortul helps

  • Each vessel, relief valve, pump and compressor is an asset with its inspection history.
  • A recurring PM with a checklist captures the fields above every time: date, person, asset, what was done, result.
  • A deficiency found in an inspection becomes a work order, so it is tracked to closure.

Fortul does not replace your PSM program, your process safety information or your IIAR-based procedures. It holds the maintenance records those programs depend on.

5. Doors, docks and forklifts

In a cold warehouse the building is part of the machine. Dock doors, seals, levelers, strip curtains, defrost heaters and forklifts take daily abuse and fail at the worst time.

How Fortul helps

  • Put a QR sticker on every dock door and lift truck. Anyone on the floor scans it, takes a photo or records a voice note, and submits in about 30 seconds. No app, no login, no email. Requesters are free and unlimited.
  • Forklift pre-shift checks can be a checklist per truck. OSHA 29 CFR 1910.178(q)(7) asks for an examination of each powered industrial truck at least daily before it goes into service. Fortul keeps the record per truck.
  • Recurring PMs for door seals, leveler hydraulics, battery watering and charger checks, by calendar or by hours.

6. Multilingual shift crews

Nights and weekends are often staffed by crews who speak different first languages.

How Fortul helps

  • The field app and QR portal run in 10 languages. Voice reports work in some languages; the rest are in beta. Messages and notes are auto-translated.
  • A tech can speak Spanish; the manager reads the work order in English.
  • Picture-first reporting is available for crews without a supported language.

7. No signal in the freezer

Steel, insulation and thick walls block signal. In many cold stores, the report you start inside the freezer is lost or never finished.

How Fortul helps

  • Full offline on every plan: create and close work orders, log parts, all offline. Things sync when the tech walks back to a signal.
  • Tested with 10,000 random offline, kill and reconnect cycles: zero lost or duplicated records. If two edits conflict, Fortul shows both to the user.
  • Controls sized for gloves (48 pt targets) and voice input so techs do not have to type.

Cold-storage PMs to start with

A starter list. Tune it to your OEM manuals, your refrigeration contractor and your written programs.

AreaExample PMTypical trigger
CompressorsOil level and pressure check, vibration/noise walk-aroundDaily/weekly, run hours
EvaporatorsCoil and drain pan inspection, fan check, defrost checkWeekly/monthly
CondensersFan, coil and water-treatment checkMonthly/quarterly
Ammonia systemRelief-valve tracking, insulation and piping inspection, detector and alarm testPer your PSM/IIAR-based program
RefrigerantLeak inspection, additions logPer rule and system size
Dock doorsSeal, track, motor and safety-edge checkMonthly
LevelersHydraulics, lip and toe-guard checkQuarterly
ForkliftsPre-shift checklist, battery/charger PMDaily, hours
Floors and slabHeave/frost and door-threshold inspectionAnnual
SensorsTemperature-probe verification against referencePer your food-safety program

Premium for multi-site and 3PL operators

Basic covers up to three buildings, with a site switch and one combined view across them. Premium adds unlimited sites, cross-site part transfers, purchase requests and POs, parts and purchase cost tracking, scheduling optimization, sensor alarm webhooks and write API/MCP that acts as the key’s user, with that user’s permissions. Basic has the full AI core, offline, meter-based PMs and unlimited checklists.

BasicPremium
Per user/month, billed annually$19$39
Per user/month, billed monthly$23$45
SitesUp to 3Unlimited
Sensor alarm webhooks to draft work orders—Yes
Team members (report, check, view, approve)Free, unlimitedFree, unlimited

Prices plus applicable sales tax. 30-day free trial on Premium, no card. Self-serve refund any time; on annual plans, used months are repriced at the monthly rate. Launch price: sign up by January 31, 2027 and pay Basic $9 or Premium $19 per user per month, locked for 12 months from your first charge.


Security

AWS US East (Ohio). Encryption in transit and at rest. Org-level isolation enforced by Postgres row-level security. Audit log of every change. Export any time. 99.9% monthly uptime target with a public status page. Fortul does not currently hold a third-party security certification or audit report.


FAQ

Does Fortul monitor temperatures? No. Use your existing monitoring or BMS. On Premium, that system can send an alarm to a Fortul webhook and Fortul creates a draft work order for a person to approve.

Does Fortul work in a minus-20 freezer with no signal? Yes. Create, close and log parts offline. Everything syncs when the device reconnects. Cold can affect batteries and touchscreens, so use gloves and devices rated for your environment. Voice input means less typing.

Can Fortul keep my refrigerant leak records? It can hold the records: refrigerant additions, leak inspections, repairs and verification tests as work orders and checklists, with an audit log. It does not calculate legal compliance for you. Check the current rule for your refrigerant and system.

We have ammonia. Is Fortul a PSM system? No. Fortul holds the maintenance and inspection records that a PSM or RMP program relies on. Your program, procedures and process safety information stay yours.

Do my forklift operators need to install an app? Operators reporting a problem can scan a QR sticker and report in about 30 seconds with no app, no login and no email. Techs and leads use the app.

Can drivers and customers’ staff submit requests? Yes. Team members (reporting, checks, viewing, approvals) are free and unlimited.

What languages do crews get? The field app and QR portal run in 10 languages. Voice reports work in some languages; the rest are in beta. Messages and notes are auto-translated. Picture-first reporting covers other languages.

Can Fortul change records without a person? No. Fortul drafts; a person approves anything that matters. Fortul uses the same permissions as the signed-in user, and every change is in the audit log.

How long does setup take? Import your assets and PMs from Excel or another CMMS in a day. The launch goal is a first work order within 10 minutes of signing up.

How much does it cost? Per user per month: Basic $19 annual / $23 monthly, Premium $39 / $45. Volume discounts at 11+ paid seats. See /pricing.


Next steps

Email us Launching January 2027

  • Free: Food-plant PM calendar (reuse the refrigeration, dock and forklift rows)
  • Free: Downtime cost calculator

This page helps organize records. It is not legal or compliance advice; check the current standard and your auditor’s requirements.

Sources